A4 stainless steel jumper shackle with screws

For guardrail net installed in a wooden structure, we recommend our A4 stainless steel jumper shackle with two 4.5x35 mm wood screws pack.

This pack can be used to install your vertical home net indoors or outdoors using our jumper shackles and compatible screws.

→ See the specifications below for the 2 products in the pack:

• A4 stainless steel jumper shackle
• 4.5x35 mm A2 stainless steel wood screws

Installing jumper shackles:

We recommend installing jumper shackles every 120 mm along your wooden structure. This will ensure load and tension is evenly spread along your vertical net.

Quick and easy to install, they require only a drill to attach the two screws per eye plate. Make sure, however, that plates are placed at the same level all along the outside the edge of the net. For perfect symmetry, remember to attach all the jumper shackles in the same direction.

If necessary, drill a pilot hole and adjust the torque on your drill.

Please note that A2 4.5x35 mm screws can only be used in wood thicker than 40 mm.

You will be sent by email an installation guide once your order is received and before your net is delivered.

⚠ Jumper shackles cannot be used in plaster partitions or walls, or in non-structural material.

In the online configurator tool:

Our online form for your custom-made home net will automatically calculate the number of fasteners you need based on the dimensions you enter for your structure. If needed, you can adjust the quantity ordered in the form.

Other fasteners for vertical home nets on wooden structures are available on our website. Select "Other products" on the main menu.

→ Find out more about the different types of structure and compatible fasteners in this article.